QUOTE SERVICE
• Fill out the info form to receive a
parts quote or to get more information on any special request!
• Send e-mail to our
Canadian techs.
|
|
|
Online Shopping
now available for over 40,000 products |
|
| |
BACK
TO SHURFLO PUMPS PAGE
GO TO REPAIR
PARTS PAGE
 |
SHURFLO BAITWELL BILGE
& WASHDOWN PUMPS |
FILL
OUT INFO FORM OR E-MAIL
US TO RECEIVE A DISCOUNTED QUOTE
THE
BAITMASTER TM WASHDOWN/BAITWELL PUMP
 |
This heavy duty
Baitmaster pump is the pump of choice for livewell use or wash-down
applications in hostile environments. The pump, completely encapsulated by
our ShurCote TM marine tough waterproof coating, is immune to splashed
liquids and rugged enough to stand up to applications which would turn
other pumps to scrap. A premium continuous duty motor, low amp draw in
livewell applications, and all-weather armor have convinced over 90% of
the nation’s sportfishing manufacturers to select the Baitmaster. The
Baitmaster self primes to 12 feet, allowing remote mounting, and can be
run dry without damage. A built-in auto-shutoff switch and ignition
protection insure the easy set-up and safety of this premium performer.
Includes waterproof heatshrink splice connectors. See REPAIR
PARTS PAGE for parts. Model #SF 2088-414-734 - 3.6 GPM
12
VDC - 10 psi, 6 Amps (Livewell use) 40 psi, 12 Amps (Washdown use) |
THE
BLASTER TM WASHDOWN
PUMP
| Blast the grimiest decks
clean easily with the powerful continuous flow from Shurflo’s Blaster.
The Blaster is UL Marine Approved and built to last. Perfect for tough
wash-down applications such as fish box, scaling, and anchor chain
cleaning areas. A high lift, self-priming pump which can mount in any
position – and be run dry without damage. As an additional safety
feature, the Blaster is thermally protected to prevent overheating during
extended use periods. Standard features include ignition protection, plus
a self-contained shut-off switch, and it comes complete with a
non-corrosive heavy duty hose nozzle in the aftermarket packaging. See REPAIR
PARTS PAGE for parts
Model #SF
2088-534-344 3.2 GPM, 40 psi, 12 VDC, 4.0 Amps @ open flow |
 |
SHURFLO
"SENTRY" MAGNETIC DRIVE BAITWELL PUMPS
IN 12VDC
 |
The Shurflo "Sentry"
magnetic drive baitwell pumps are ignition protected, sealless, and will
not airlock. Their unique design can run dry without damage. Each pump is
protected from bilge water splash by its totally submersible construction.
The suction port is threaded 3/4"MPT and the discharge varies with
each model (see below).
|
SHURFLO
SUBMERSIBLE BILGE PUMPS
| Shurflo’s
submersible bilge pumps are tough, reliable, and built to last! Their
special heavy-duty lubricated shaft seal allows dry running without
damage. Both models have a 7 foot sleeved waterproof lead wire to keep
electrical connections out of the bilge area and heatshrink waterproof
splice connectors are included. They’re also backed with a full 2-year
limited warranty. Both models are ignition-protected and water-sealed,
both use 1-1/8" I.D. hose, and both meet U.S. Coast Guard and
American Boat and Yacht Council requirements.
SF #1800-210-012 1800
GPH, 12 VDC, 9.5 Amps Maximum SF
#1500-110-012 1500 GPH, 12 VDC, 6
Amps Maximum |
 |
GO
TO REPAIR PARTS PAGE, CLICK HERE
|
Your
Wishlist
Shopping
Cart
Contact
Us
Your
Account
Login
