Marine Partsfinders Canada
Marine Engine Parts and Boating Accessories Store

Call us at
888-532-3230 or 604-532-6900 or Fax us at 604-532-6993
Hours:
Mon.-Fri. 8.30am to 4.30pm PST
Online ordering available 24/7
We ship only within Canada 
USA and International Customers Visit Marineparts.com

 
Home | Info Form Engine Parts Catalog | Hardware & Accessories Catalog | Email | Online Shopping | Check Out
All prices in Canadian Currency

      ****WE HAVE A $25.00 MINIMUM ORDER  BEFORE SHIPPING CHARGES**** All
online orders will ship Jan 2nd
 

BACK TO MANUFACTURES PUMPS PAGE     GO TO RULE BAITWELL/WASHDOWN PAGE

HAND / SEWAGE PUMPS & BILGE PUMPS

FILL OUT INFO FORM OR E-MAIL US TO RECEIVE A DISCOUNTED QUOTE


BILGE PUMPS / NON-AUTOMATIC PUMPS IN 12, 24, 32VDC

• Positive snap lock strainer base    • Anti-airlock feature           • Water cooled motor     

• No burn-out when run dry             • Stainless steel shaft         • Compact, efficient, maintenance free      • Totally submersible                        • Ignition protected               • Silent running, vibrationless

 • Exclusive Rule moisture tight seals    

FULLY AUTOMATIC PUMPS IN 12VDC & 115VAC

• Double insulated motor  • Automatic pumping without external floats or switches to tangle, stick or fail 

• Snap-off strainer for easy cleaning     • Rust & corrosion proof     • Ready for installation    

• Ignition protected    • Heavy duty construction    • Completely submersible       • No burn-out when run dry

• Water cooled motor-designed for longer life           • Available in 12 VDC or 110 VAC models

NEW "RULE-MATE" FULLY AUTOMATED BILGE PUMPS

These pumps feature a non-mercury float switch in a single, compact housing. As the water level rises, so does the float switch, activating the pump when the water level reaches 2-1/8". There is no on/off cycling and therefore, no power use until the pump comes on. The pump remains on until the float drops and the pumps senses no load against the propeller. 

HAND BILGE PUMPS BY RULE & JABSCO

These hand bilge pumps are compact and easy to store as an emergency back-up pump. The economical ABS plastic pumps by Rule come in 8 and 10 gallon per minute sizes. The Jabsco pumps come in 6 and 12 gallon per minute sizes and are constructed of high quality brass and oil resistant internal rubber parts.

SEWAGE & BILGE PUMPS BY RULE & JABSCO

Diaphragm pumps are ideal for bilge, holding tank, and general fluid transfer. They come with a permanently installed or a removable handle. There is also a thru-deck or thru-bulkhead mounting option. Pump capacities range from 8 to 23 gpm. All models are constructed of rugged, non-corrosive plastic with stainless hardware. 

BACK TO MANUFACTURES PUMPS PAGE    GO TO RULE BAITWELL/WASHDOWN PAGE


 

  POLICY AND PROCEDURES

Call us at 888-532-3230 or 604-532-6900 or Fax us at 604-532-6993
Hours:
Mon. - Fri. 8.30am to 4.30pm PST

WE ARE LOCATED AT:
    #5 4044 200B Street
Langley, B.C. V3A 1N9

We ship only within Canada 
USA and International Customers Visit Marineparts.com

| Info form | E-mail | Contents | Home |