QUOTE SERVICE
• Fill out the info form to receive a
parts quote or to get more information on any special request!
• Send e-mail to our
Canadian techs.
|
|
|
Online Shopping
now available for over 40,000 products |
|
| |
BACK
TO OBERDORFER PUMPS PAGE
GO TO MANUFACTURES
PAGE
 GEAR
PUMPS, CLUTCH PUMPS, DIESEL
TRANSFER & FIRE PUMPS
FILL
OUT INFO FORM OR E-MAIL
US TO RECEIVE A DISCOUNTED QUOTE
OBERDORFER
1",1-1/4", & 2" ELECTRIC & MANUAL
|
The
Oberdorfer clutch pumps incorporate the best features including 2 spaced
ball bearings, a mechanical seal, and an o-ring cover. The Oberdorfer pump
comes in 1" port size and are available manually operated or with a
12, 24, or 32vdc clutch. The Johnson pumps come in 1", 1-1/4'",
and 2" ports with a choice of a 12, 24, or 32vdc clutch. (See PUMPS
PAGE parts.)
|
OBERDORFER
GEAR PUMPS 1/2",3/4",1",1-1/4", & 1-1/2" ELECTRIC
 |
The Oberdorfer clutch gear pumps
can operate with pressures up to 100 PSI continuous and 150 PSI
intermittent. This makes them an ideal pump for high-pressure washdown or
fire fighting. This series comes in 1/2", 3/4", 1",
1-1/4", & 1-1/2" ports with a choice of a 12, 24, or 32vdc
clutch.
|
OBERDORFER
UP TO 61 GPM, UP TO 100 PSI IN BRONZE
 |
The
bronze Oberdorfer 1100 series meets USCG specifications as an auxilary
fire pump for most vessels. Options include single or three phase voltage,
50 or 60hz, IEEE-45 enclosure, and custom configurations that meet MSA,
Lloyds, ABS, and USCG specifications. Below are some examples of the
choices available. Call us for information on the configuration to meet
your requirements. |
 |
OBERDORFER
UP TO 85 GPM, UP TO 100 PSI IN BRONZE
| The
bronze Oberdorfer clutch driven gear pump meets USCG specifications as an
auxilary fire pump for most vessels. They utilize a 7" diameter
double groove clutch for 1/2" belts and come in 1-1/4" &
1-1/2" sizes.
|
 |
OBERDORFER
BRONZE GEAR PUMPS – 1/2 TO 23GPM
| The bronze Oberdorfer pedestal
rotary gear pumps are ideal for diesel transfer, oil change, and general
liquid transfer. They are available with or without a relief valve and in
a variety of port sizes (1/4", 3/8", 1/2", 3/4", &
1") and flow rates (1/2 to 23GPM). Bases, shims, couplings, and
coupling guards are available to enable easy alignment and assembly.
Complete pump and motor packages are available to meet your specific
requirements.
Performance
Table |
|
 |
| Above performance table applies
to liquids at 33 SSU viscosity. Liquids of higher viscosities require
lower shaft speeds and higher horsepower. |
OBERDORFER
BRONZE GEAR PUMPS – 11 TO 172GPM
| These bronze high volume
Oberdorfer pedestal rotary gear pumps are ideal for diesel transfer, fire
fighting, and general liquid transfer. They are available in a variety of
port sizes (1-1/4", 1-1/2", & 2") and flow rates (11 to
172GPM). Bases, shims, couplings, and coupling guards are available to
enable easy alignment and assembly. Complete pump and motor packages are
available to meet your specific requirements. |
SEE ALSO OUR OIL CHANGE PUMPS PAGE
BACK TO OBERDORFER
PUMPS PAGE
GO TO MANUFACTURES PAGE
|
Your
Wishlist
Shopping
Cart
Contact
Us
Your
Account
Login
