BACK TO JABSCO PUMP PAGE    NEXT IMPELLER PAGE

FLEXIBLE IMPELLER & BILGE PUMPS

FILL OUT INFO FORM OR E-MAIL US TO RECEIVE A DISCOUNTED QUOTE

1. WATER PUPPY
The workhorse of our range! Designed for bilge pumping, or general transfer duty. Self priming up to 1.2m (4ft), with an output of 1920 lph (420 gph), this pump is built to the same high spec as the Maxi Puppy.

Flow @ 10' (3m) total head

2. UTILITY PUPPY 2000
This pump gives the same performance in all aspects as the Water Puppy but its clever pump design means it will run dry for up to 20 minutes without damage.

 

Part Number	Ports (Int.)	CE	Vdc	Flow GPM (LPM)
23920-9403	¾"NPT	X	12	7.0(31.7)
23920-2403	¾"BPS	X	12	7.0(31.7)
23920-9503	¾"NPT	X	24	7.0(31.7)
23920-2503	¾"BPS	X	24	7.0(31.7)

   Flow @ 10' (3m) total head

3. MAXI PUPPY
A high pressure and flow pump for bilge pumping and deckwash. Self priming up to 2.4m (8ft) with an output of 2640 lph (600 gph). It's built to last with a bronze pump head and oil resistant nitrile impeller.

Part Number	Ports (Int.)	Ports (Ext.)	CE	Vdc	Flow GPM (LPM)
16360-1003	¾"NPT	1"GHT	X	12	7.8(30)
23610-2003	- -	1" slip-on	X	12	10(44)
23610-2103	- -	1" slip-on	X	24	10(44)

   Flow @ 10' (3m) total head

4. UTILITY PUPPY 3000
The heavy duty Puppy pump. Suitable for commercial applications or prolonged hard use. Flow and performance are as per the Maxi Puppy, but the Utility Puppy 3000 boasts ten minutes dry running and an indestructible mechanical seal for long life.

Part Number	Ports (Int.)	CE	Vdc	Flow GPM (LPM)
23920-9213	¾"NPT	X	12	11(48.4)
23920-2213	¾"BPS	X	12	11(48.4)
23920-9313	¾"NPT	X	24	11(48.4)
23920-2103	¾"BPS	X	24	11(48.4)

   Flow @ 10' (3m) total head

HEAVY DUTY BILGE PUMPS

Jabsco have made an important addition to their range of successful DC flexible impeller pumps.
Based on the proven Jabsco design, the new Utility Puppy has the unique feature of being able to run dry for up to 10 minutes after the initial prime. Therefore there is less worry of damaging the impeller by forgetting to switch the pump off. This versatility is further enhanced by the pumps ability to self prime up to a 2.4 meter vertical lift.

Simply constructed, the Utiltiy Puppy has few wearing parts, all of which are service friendly and easily accessible.

Debris presents no problem to this robust, bronze bodied pump. It is therefore ideal for use in bilge pumping and general liquid transfer, including water and diesel fuel.

The Utility Puppy is available with either a 12V or 24V continuous rated DC motor. There is also a choice of a 35 litre version with lipseal, or a 45 litre version with a mechanical seal for commercial heavy duty applications. It has 3/4" BSP internal ports.

JABSCO UTILITY PUPPIES TECHNICAL SPECIFICATIONS

 TOP            MORE IMPELLER PUMPS, NEXT PAGE