BACK TO JABSCO PUMPS    MANUAL BILGE PUMPS & ACCESSORIES 

GO TO MANUFACTURES PAGE LIST

MARINE SUBMERSIBLES & DIAPHRAGM BILGE PUMPS

FILL OUT INFO FORM OR E-MAIL US TO RECEIVE A DISCOUNTED QUOTE

NEW SUPER SUBMERSIBLES FROM JABSCO

Jabsco has completely re-developed their range of submersible bilge pumps. Five new models have been re-engineered to give longer life, higher outputs and guaranteed dry run ability, all at less cost.

Each of the five pumps has been designed to meet specific applications from open ski-boats and weekenders through to large yachts and motor cruisers. Open flow outputs range from 1700 litres per hour (450 US gph) at the small boat end, to 13500 litres per hour (3550 US gph) for large craft pumps.

All are compact, made from corrosion free materials and operate with a low amp draw to conserve batteries. They are fully approved to ISO and CE Standards.

At the same time Jabsco have launched a new float switch suitable for operating any electric bilge pump or alarm. It provides automatic on-off control and is designed to prevent rapid on-off cycling. An optional switch cover is available which protects the unit from accidental jamming by debris.

Diaphragm Bilge Pumps
	37202-2 SERIES New and updated version of the famous 37202 - the best selling small bilge and shower sump pump in the world. Now fully corrosion resistant and quiet running. 780 lph output and self priming to 2m (6ft). Supplied with pumpgard strainer. Part numbers: 37202-2012 12V     37202-2024 24V
	PAR-MAX 4 Super quiet and compact four chamber diaphragm bilge pump. Highly reliable with built in thermal overload protection. Clip-in 19mm ports simplify removal for servicing. 864 lph (190 gph) output, self priming up to 2m (6ft). Supplied with pumpgard strainer. Part numbers: 30705-0092 12V 30705-0094 24V
JABSCO 115VAC WATER SYSTEM PUMP This Jabsco 115vac diaphragm pump has been proven in the industrial market as a continuous duty demand pump. Ideally suited for fresh water supply, this pump develops 40 psi, a flow of 3.5 gpm, lift up to 10 feet, and quick connect 1/2" barb ports (Other sizes are available). This pump is not ignition protected.
	36680, 36600, 34600 The original belt driven diaphragm pumps, Self priming and dry running. Belt drives, rubber mounting and internal pulsation dampeners reduce noise and vibration. The 34600 gives 2450 lph (540 gph), the 36600 1800 lph (400gph) and the 36680 1250 lph (275 gph). Part numbers: 36680-0000 12V    36680-0010 24V 36600-0000 12V    36600-0010 24V 34600-0000 12V    34600-0010 24V