2. PAR MAX 3
All the design features of the larger output PAR-Max 4 but with a 3.4 gpm (12.8 lpm) flow rate. Suitable for installations with up to 3 outlets.

Part Number CE voltage Flow GPM (LPM) Pressure (bar) Cut-In / Cut-Out Amps @ 10psi 30600-0012 X 12 3.4 / 12,8 20 (1.4) 40 (2.8) 5 30600-0092 X 12 3.4 / 12,8 20 (1.4) 40 (2.8) 5 30620-0024 X 24 3.4 / 12,8 20 (1.4) 40 (2.8) 3 30600-0094 X 24 3.4 / 12,8 20 (1.4) 40 (2.8) 3 30600-0292 X 12 3.4 / 12,8 10 (0.7) 20 (1.4) 5 30600-0294 X 24 3.4 / 12,8 10 (0.7) 20 (1.4) 3 Italicized models utilize pressure switches set to popular European settings.

 

3. PAR-MATE
A compact pump giving 2.5 gpm (9 lpm). Its duplex diaphragm design gives smooth flow and is quiet running.

ULTRA-MAX Automatic multi-outlet water system
ULTRA-MAX provides the ultimate in water system performance and installation convenience. We've done the assembly work for you. This "all-in-one" system features a PAR-MAX 4 pump, inlet strainer and accumulator tank, all neatly assembled with snap-in port fittings on a corrosion proof base.

The system has a low mounting profile, can be installed in any position and has vibration and noise isolating rubber mounts. The color-coded screw down terminals in the system base make wiring a snap. Installation takes just minutes requiring only base mounting, two plumbing and two wire connections.

PAR-MAX 4 pumps self-primes to 5ft. runs dry without damage and provides quiet, low amp draw operation.

1-liter accumulator tank smoothes flow, eliminates pulsation, and ensures even temperature mix at the faucet. Its bladder type design never needs recharging.

Pumpgard strainer snaps directly into the PAR-MAX pump is supported by a sturdy molded in leg. The stainless steel fine mesh screen can be removed in seconds without tools for easy maintenance.

Motors are thermally protected, comply with USCG Electrical regulations including ignition protection, ISO 8846 MARINE, and are CE marked. Ultra-Max is supplied with both ½” Qest treaded and ½” barbed inlet and outlet ports.

 

Part Number	CE	Vdc	Nominal Cut-in Pressure (bar)	Nominal Cut-out Pressure (bar)	Max Amp Draw	Pump Fuse	Breaker
59450-1012	X	12	7.5 / 28,4	20 (1,4)	15	10	20
59450-1024	X	24	7.5 / 28,4	20 (1,4)	7.5	10	20

DUAL MAX
Designed for larger boats wanting the flexibility and reliability of a dual pump system, the Dual Max provides up to 7.5 gpm (28 lpm) output. When demand is low only one pump operates, with the second pump in reserve until higher outputs are required. This saves battery power and reduces strain in the system. Includes pumpguard strainer, 2 Par-Max 4 diaphragm pumps and a 1 litre Accumulator Tank.

Part Number	CE	voltage	Flow GPM (LPM)	Pressure (bar) Cut-In / Cut-Out	Max. Amp
30670-0092	X	12	7.5 / 28,4	20 (104) 40 (2.8)	15
30670-0094	X	24	7.5 / 28,4	20 (104) 40 (2.8)	7.5

 

36950, 36800, 36900
The original diaphragm water pressure pumps. Highly reliable, belt driven pumps with built in pulsation dampeners and flexible mounts for noise and vibration reduction. All three models can run dry. The 36900 gives 4.2 gpm (16 lpm), the 36800 gives 3.3 gpm (12.5 lpm) and the 36950 gives 3 gpm (11.4 lpm).

7.  1 LITRE ACCUMULATOR TANK
A simple and economical accumulator tank for smaller pressurised water systems supplied complete with Tee piece connection for 1/2" (13mm) ID hose.

Part number:    12573-3000

8.  1 LITRE PRE-PRESSURISED ACCUMULATOR TANK
This tank comes complete with an internal membrane and valve - so it's pressure can be fine tuned to your system and it can be mounted at any angle.

Part number:    18810-0000 (USA)   23240-2000 (UK)

AQUA FILTA - NOT AVAILABLE IN NORTH AMERICA
ACTIVATED CARBON WATER FILTER! We use more than 200 grammes of activated carbon to trap impurities, the design floods the water through the carbon from below improving its filtering ability. 180° rotating ports allow for more versatile installation, but most importantly we've made the annual replacement cheaper, easier and neater. Replacement is a simple job of changing a cartridge which is half the cost of a new unit! Internal valving means you don't need to drain the system down for replacement either!

Part numbers:   59000-1000 Aqua Filta
Part numbers:   59100-0000 Replacement Cartridge



11.  TOPSIDER HAND PUMP
Economical manual galley pump, easily fitted with instant self priming. Top mounting leaves maximum space under the counter top.

Part number:   37220-1010
10.  GALLEY FAUCET PUMP
Economical and quiet centrifugal pump mounts below the water tank. Can be supplied with faucet with built-in pump switch. Flow rate of 1 gpm (3.8 lpm). Connections for 3/8" (10mm) hose.

Part numbers:   42510-0000  Pump 12V
Part numbers:   42520-0000  Faucet
Part numbers:   42530-0000  Pump and faucet 12V


MASTER SWITCH
This compact switch is supplied with 7 labels (eg "Galley pump", "Shower pump") for use wherever it's needed, and can be supplied with an illuminated "on" section and water resistant switch cover (12V only) or as a straight on/off switch for 12 or 24V DC.

Part numbers:  44960-0002 12V illuminated
Part numbers:  44960-0003 12 & 24V non-illuminated

PUMPGARDS
These compact pre filters prevent particles jamming valves and causing pump breakdowns - and we've given them a screw off transparent housing for easy inspection and quick, in place cleaning. Three models are available, see below for details.

Part numbers:   36400-0000 1/2" (13mm) hose
Part numbers:   36400-1000 1/2" male threads for Qest plumbing
Part numbers:   36400-5000 1/2" barb inlet, 1/2" threaded female (Qest type) out

BACK TO JABSCO PUMPS        BACK TO BRAND INDEX

TOP