QUOTE SERVICE
• Fill out the
info form to receive a parts quote or to get
more information on any special request!
• Send
e-mail to our Canadian techs.
|
|
| |
WE CARRY ALL MAKES OF SHORT AND LONG BLOCKS FOR MORE INFO
PLEASE EMAIL US OR FILL OUT THE INFO
FORM FOR A QUOTE
|
 |
|
 |
| The
engine is mounted inside the boat. The transmission / drive unit is
outside, attached to the transom. The engine and drive unit are joined
by a torque coupler and universal joint. Angling the drive steers the
boat. |
|
 |
|
The
engine and transmission/drive unit are inside the boat. A drive shaft is
connected directly to the drive shaft at the in-water end. A separate
rudder steers the boat. |
|
 |
|
Basically
a modified inboard installation. The engine is mounted with the front
(pulley end) facing stern (rear). The transmission, the drive shaft is
directed stern-wards under the engine and through the hull. The
propeller/rudder arrangement is the same as in a standard inboard
installation. |
|
 |
|
The
engine is mounted inside the boat and attached to a high speed pump
which draws in water through an intake grate, increases its velocity and
forces it out through a directionally adjustable nozzle which is mounted
outside the boat. Changing the direction of the nozzle steers the boat. |
|
