Barr Marine Manifolds
Please Remember we stock parts and accessories for all makes and models of marine engines and boats. These catalog pages represent just a few of the parts we stock. Use the search field on the top to search by part the Part Number with the abbreviation at the bottom of each page. If you do not find what you are looking for please fill out the info form and we will find the parts you need and respond with a quote.
Use "bar" in front of all part numbers when searching. When there is a space in a number ie: "20 0097", then use a dash "-" in the space. ie"bar20-0097"

<previous catalog page

next catalog page>

OF-1-60L Water cooled end discharge port manifold to fit the small block Chevrolet (1/2” N.P.T. cooling hose connections). All Years
 

OF-1-60R Water cooled end discharge starboard
manifold to fit the small block Chevrolet
(1/2” N.P.T. cooling hose connections).
All years

1-0019 End plate gasket (will fit both ends).

20-0000 Swivel-type high discharge exhaust riser; 8 1/2” riser protection. Requires (1) mounting hardware kit #20-0002P per riser. Use only with 2 7/8” to 3” I.D. exhaust hose.

20-0002P Mounting hardware kit.

20-0031 Swivel-type 90 degree exhaust elbow connector with internal water discharge.
Accepts 2 1/2” to 3” I.D. exhaust hose. Requires (1) mounting hardware kit #20-0002P per elbow.

20-0034 or 20-0035 Exhaust connector #20-0035 (for 2 1/2” I.D. exhaust hose) or exhaust
connector #20-0034 (for 3” I.D. exhaust hose). Connects to #20-0039 using (1) #20-0002P per connector.

20-0039 Fully jacketed swivel-type exhaust riser; 7” riser protection. Requires (2)
mounting hardware kits #20-0002P ((1) kit to mount riser to manifold
and (1) kit to mount elbows #20-0034 or #20-0035 to riser). Use for Models
F, G, K, and Q; requires (1) CC-6-80 package.

20-0055 Swivel-type 30 degree exhaust elbow connector; fully jacketed. Accepts
2 1/2” or 3” I.D. exhaust hose. Requires (1) mounting hardware kit
#20-0002P per elbow.

CHV-47-0000 Manifold to cylinder head gasket.
 

OF-1-60F-P Manifold to cylinder head mountingpackage

 

<previous catalog page

next catalog page>